Bike Rack Shops Identifies how Bike Racks are Poised to Remain One of the Least Expensive Ways to Earn Points when LEED Standards Changes Take Place in November


Lake Forest, IL (PRWEB) May 01, 2012

The U.S. Green Building Council is preparing to enact its modifications to the Leadership in Energy and Environmental Design (LEED) certification requirements in November. Every change by the Council is to promote its goal of reducing emissions, and in this case, to benefit cyclists and encourage more people to ride their bikes instead of driving. Cyclists should come to see commercial bike racks in more convenient locations and be integrated into the buildings design scheme more seamlessly.

According to the Councils website, key changes regarding bike racks dictate the maximum distance an outdoor bike rack can be from a buildings front door, and how the bike racks must be within 200 yards of a bicycle network. The bicycle network requirement is new, and an additional guideline stipulates how a school, transit stop, or 10 other uses must be within three miles for a building to receive credit. Some builders may find difficulty integrating bike racks into a buildings architectural landscape or even come to find that the building doesnt meet the location requirements for including a commercial bike rack.

The changes make it all the more important for builders to find commercial bike racks that are going to fit the design aesthetic of the building. Low-profile racks, like the bike dock, only require a small footprint, and they dont disrupt the visual appeal of the building. Wave-style bike racks, on the other hand, can accommodate many bikes and are available in a wide range of colors.

The cycling enthusiasts at Bike Rack Shops view the changes as good ones. People are going to be willing to install commercial bike racks that are more attractive and more convenient for cyclists to use, which is in line with our goal of encouraging people to ride their bikes, remarked Alex Miller, President of Renaissance Retail, Bike Rack Shops parent company. They also feel the more finished looks of the buildings will benefit builders, full-time occupants of buildings, and visitors to buildings certified under the U.S. Green Councils new standards.

Bike Rack Shops was the Internets first dedicated source for meeting the vehicle and storage rack needs of cyclists and has evolved into the Internets leading source for bicycle and storage racks. Its mission is to provide outstanding service, the lowest allowable prices, and the widest selection of leading bike rack brands. Headquartered in Lake Forest, Illinois, Bike Rack Shops is a division of Renaissance Retail, the Internets leading source for specialty consumer products.

Contact:

Timothy Benson

Renaissance Retail

847-932-4720 ext. 2704

Email: tim(at)bikerackshops(dot)com







Related Landscape Architecture Press Releases

Latest Business Vans News: Cutting fuel bill by at least 15 per cent is very possible today


(PRWEB UK) 26 November 2012

FUEL costs: they just get higher and higher. Not that one needs reminding of the next guaranteed increase, but fuel duty is set to rise in January 2013 by 3p per litre.

Every small business could do without that, but bigger bills are on the way. Its inevitable. Or is it?

The Forum of Private Business, which campaigns on behalf of small businesses, has issued a statement to the Chancellor calling on action to improve the economy in his Autumn Statement. And its number one issue is fuel duty.

Of all the costs to business, fuel hits the largest number of our members. We want to see the Chancellor freezing fuel duty for at least a further six months, says the Forums Head of Policy, Alex Jackman.

But what if the Chancellor doesnt listen. What then, many will wonder.

Actually, theres a way to cut fuel costs. By at least 15 per cent.

Most drivers can reduce their fuel bills by 15 per cent simply by driving in a more fuel-efficient way. With specialist training, the saving often rises to 25 per cent. But lets keep it simple.

What can one do, without any expensive training, to cut their fuel bill?

Three things. Efficient driving. Efficient planning. Efficient van prep.

Efficient driving

Efficient driving, first. Drivers should think ahead, look further down the road and anticipate road conditions. Its about preserving momentum, and trying to avoid sudden braking and sharp acceleration.

They shouldn’t welly it away from the lights and then slam on the anchors at the last minute for the next red light. That wastes fuel.

Where possible, they should change up at about 2000rpm. This keeps a diesel engine in its most fuel-efficient operating range. Many drivers also find it a less stressful way to drive than revving the socks off the engine.

Watch ones speed. Driving at 85mph uses 25 per cent more fuel than driving at 70mph, according to the Energy Saving Trust. And when they’re stuck in stationary traffic or parked up, say, taking a call, they should switch off the engine.

Using the aircon can keep drivers alert and thats good for safety but its worth knowing that the aircon adds between two and five per cent to the fuel bill. Keeping the windows closed at higher speeds will also boost mpg.

Efficient planning

Next, planning. Dont burn fuel doing unnecessary mileage.

Satnavs can help reduce ones dead mileage. Yes, they sometimes get a bad press but more often than not theyll prevent one driving round aimlessly in an unfamiliar neighbourhood in search of a new clients premises.

Whats more, many satnavs including Garmins and Tom Toms include an eco route option, where they will plan the most fuel-efficient route. If their satnav does that, they should use it.

Alternatively, use one of the many free online journey planners and, where possible, drive at times when traffic is freer flowing. They could use online fuel comparison sites, too, so they know the cheapest places to fill up.

Efficient van prep

Finally, the van. Check the tyre pressures.

On top of vital safety issues, a 25 per cent drop in recommended pressure bumps up ones fuel bill by two per cent. It all adds up.

They should take notice of the new EU tyre labelling regs when they replace their tyres. They can now see which tyres are most economical on fuel and it can make a big difference.

They shouldn’t put stuff on the roof unless they need to at motorway speeds, a simple roof rack – even unloaded – can increase fuel consumption by 16 per cent, according to a study by automotive design and engineering firm IDEA.

And weight: they shouldn’t carry unnecessary cargo or equipment. Weight is a key factor in fuel consumption: the more of it they have to shift, the more fuel theyll be using.

The effect of speed on fuel consumption

They dont have to drive everywhere Harry Flattersin fact the more considered their driving, the more theyll save:

For a typical large van the increases in fuel consumption depending on van speedare dramatic

HomeThangs.com Introduces a Selection of Best Quality, Least Expensive Stainless Steel Kitchen Sinks


(PRWEB) July 06, 2012

HomeThangs.com has made their goal to deliver the right product to the consumer, with that in mind, shopping and home design tips, as well as special product selections are being introduced.

Good stainless steel sinks will last for years, and knowing what to look for, will help get an incredible, high quality product for a fraction of the price.

A few tips to keep in mind when shopping for stainless steel kitchen sink:

1 . The very most important thing to remember when shopping stainless steel sinks is gauge. The gauge of a piece of steel is how many times its been run through a press and thinned. For example 1 gauge steel was rolled once, and 100 gauge steel was pressed thinner and thinner a hundred times. Kitchen sinks usually come in between 16 (the thickest) and 22 or 24 (the thinnest). For the very absolute best quality, a 16 gauge sink would be the best choice, such as this Double Basin Sink from Artisan, but it is also going to cost more.

2. If one is on a budget, anywhere from 18-20 gauge is just fine, and can dramatically lower the price of the sink in many cases from somewhere in the $ 600+ range down to $ 100-200 or so. Now, even so, the lower the gauge on the sink the better, and anything over 20 is not recommended altogether, but to get a good quality stainless steel sink with a more reasonable price tag, dropping from 16 to 18 or even 20 gauge is a great way to cut costs without sacrificing much quality. For example, something like this 20 Gauge Sink from AmeriSink will serve just fine outside an intensive commercial kitchen.

Cons of higher gauge sinks: